Page 1
Thank you for purchasing our product. Before installing/operating the product, read the instructions carefully and retain them for future reference. Attention! ● For installation, follow the steps described. Any damage caused by wrong installation shall be imputed to the users. ●...
Optional accessories L type speed sensor Water temp sensor Oil temp sensor adapter bracket adapter M12 X P1.5 X 15L M14 X P1.25 X 15L M14 X P1.5 X 15L M16 X P1.5 X 15L M18 X P1.5 X 15L M16.
The active speed sensor needs to be facing a metal surface to detect the speed. EX. 1 The disc screw. EX. 2 The disc to detect the disc gap. (Make sure the distances between the gaps are the same in advance to avoid improper speed signal.) EX.
Basic Function Instructions Speedometer Odometer ●Display range : 0 ~ 160 km/h (MPH) ●Display range : 0 ~ 99,999 km (mile) ●Display unit : 20 km/h (MPH) (Large grid), ●Display unit : 1 km (mile) 10km/h (MPH) (Small grid) Trip meter A, B ●Display range : 0.0~9,999.9 km (mile) Indicator ●Display unit : 0.1 km (mile)
Page 6
Main Menu Switching Description ●In the Max. temp. screen, press the button ●In the total mileage screen, press the button to enter the TRIP A screen. to go back to the total mileage screen. ●In the total mileage screen, press the button NOTE When the temperature function is for 3 seconds to enter the setting screen.
Page 7
Setting Screen Switching Description ●Press the button for 3 seconds in the main screen(ODO) to switch to the setting screen. ●Press the button to select ❶Clock ❷Unit(Speed/Temperature) ❸Backlight(Color/Brightness) ❹Tire circumference, Sensing point ❺Speeding warning ❻Temperatur ❼Voltage ❽Fuel resistance, Low Fuel warning ❾Warning light warning ❿Internal and External ODO NOTE During setting, if no button is not pressed for 30 seconds, it will automatically return to the startup screen.
Clock Setting ●Press the button for 3 seconds ●In the Clock screen, press the button for 3 seconds to enter the Clock setting. to move to the digit you want to set. ●EX: To set clock(minute) as 10 minutes. Now the setting value is flashing. NOTE Setting range : 00~59 minutes.
Page 9
Backlight Setting(Color/Brightness) ●In the backlight(Color/Brightness) screen, ●Example : To set the backlight brightness press the button for 3 seconds to enter at 2/3. the backlight color setting. ●Press the button to choose the setting number. Now the setting value is flashing. NOTE Setting range : 1/3(Darkest)~ 3/3(Brightest).
Speeding Warning Setting ● In the speeding warning screen, press the ●EX : Set speed warning value from 38 MPH button for 3 seconds to enter the speeding to 51 MPH. warning setting. ●Press the button for 3 seconds to go back to the speed warning screen.
Voltage Setting ●In the voltage screen, press the button for ●Press the button to choose the setting number. 3 seconds to enter the voltage setting. ●Example : To set voltage function to ON . ●EX : Set low voltage warning value from ●Press the button to choose the setting DC 11.5 V to DC 11.0 V.
Page 12
5-8-2 Fuel Gauge Resistance Setting (Auto Detection) 油量表阻抗值(Ω)操作設定 ●Press the button for 3 seconds to enter the fuel gauge resistance setting(auto detection). The highest position CAUTION! ●If the fuel surface sensor floats in the ●Before detection, ensure that your highest position then press the button, current fuel level is in the lowest position it will detect the resistance around 10 Ω.
Page 13
Warning Light Setting ●In the w arning light screen, press the button ●Press the SELECT button to choose the setting number. for 3 seconds to enter the w arning light setting. ●Press the button for 3 seconds to go back to the w arning light screen.
Troubleshooting The following situations do not indicate malfunctions of the product. Check the following before taking it in for repair. Trouble Check item Trouble Check item The meter doesn't work ●The power isn't supplied to the meter. Fuel meter doesn't display ●Check your fuel tank.