Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 79

Before Requesting Service
BETAS MET Ga LS eee BE IETS 26 DADRA Ta CTO saad = TG Oa a
If a problem arises, you may be able to correct it yourself.
See Symptom and Correction list below.
[Symptom Correction
No picture in EVF or LCD monitor ... * Connect Power Source. (pp. 12, 14)
* Set POWER to VCR or CAMERA. (pp. 23, 29)
¢ Check for Dew Indication. (p. 70)
* Use fully charged Battery. (p. 12)
* Firmly connect all needed cables. (p. 31)
The right side of the screen appears grayish... |* Be sure to slide Digital Select to Ogital Wipe. (p. 58)
Video cassette cannot be inserted ... * Connect Power Source. (pp. 12, 14}
* Insert cassette, window side facing out. (p. 15)
PEELE 6
Video cassette cannot be removed ... « Connect Power Source. (pp. 12, 14)
Operation buttons do not work ... * Check for Dew Indication. (p. 70)
Auto Focus does not operate ... * Set FOCUS to AUTO. (p. 35)
* Set POWER to CAMERA. (p. 23)
Sound from microphone can't be monitored... |* Set unit to REC or Record/Pause mode.
Camera picture is too dark ... * Turn HIGH SPEED SHUTTER off. (p. 36)
No playback picture, or the playback * Press UP &/DOWN ¥ button during playback (Tracking
picture is noisy or contains streaks ... Control). {p.30}
"Panasonic ITS TAPES PLAY IN YOUR VCR .."|* Set POWER to CAMERA, then set SELF DEMO : OFF
"NO CF CARD" appears in EVF or LCD * Make sure CompactFlash Card is inserted. (p. 49)
Monitor ... .
Cannot capture the image ... * Set POWER to PHOTO. (p. 50)
* No memory remaining. Delete some images before
capturing more images.
Cannot playback Still image ... * Set POWER to PHOTO. (p. 53)
* Make sure CompactFlash Card is inserted. (p. 49)
"NO PICTURE" appears in EVF or LCD * There are no images in memory.
Monitor ...
Top of playback picture waves back and forth ¢ A playback signal is not as stable as an off the air TV
excessively ... signal, so the top of your TV screen may appear bent or
unstable during playback. This is called, "Horizontal
AFC time constant change." To correct, slowly turn the
TV horizontal hold control. If you TV does not have this
control, or adjusting it does not help, contact your TV
service center. (Some nominal service charges may be
required.)