Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 73

eit 2 Operation Notes
Attaching Optional Filters and Lenses
When you remove the Lens Hood, pinch the Lens Hood
and turn it counterclockwise as illustrated at right.
Then attach an optional filter or lens.
* Be careful not to touch the lens itself.
* Replace the Lens Hood after removing the accessory.
a -Vel-W a loleleW Ve-1-MO@)el-le-1ie) amer:li lite) ane
With a Wide or Telephoto conversion lens (optional) attached, the four corners of the
screen may darken when zoom is set to maximum wide angle.
When attaching the lens hood, a Wide or Telephoto conversion lens (optional), etc. after
a filter (optional) has been attached, the four corners of the screen may darken when
zoom is set to maximum wide angle.
With two filters (optional) attached, the four corners of the screen may darken when zoom
is set to maximum wide angle.
1 @) Remove the screw with a Phillips
screwdriver.
Turn counterclockwise.
® Turn the EVF Eyepiece.
© Pull the EVF Eyepiece.
2 Remove any lint or dust particles
with a soft clean cloth being careful
not to scratch the glass surfaces.
OL AUO NG, L0¢
3 Replace the EVF Eyepiece and the
screw.
73