Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 23

Camera Recording
esimple:Recording::. Before you begin...
* Connect Camcorder to power source.
¢ Insert cassette with record tab (page 15).
1 Set POWER to CAMERA.
2 VISION Lens Cover opens.
ADJUSTMENT Power lamp lights. EVF or LCD
*Be sure POWER _ Monitor
'is fully turned to
CAMERA
position.
PAUSE
Record/Pause mode.
2 Look into EVF and adjust VISION
ADJUSTMENT to your eyesight.
1 3 Slide TAPE SPEED to SP or SLP
(page 15).
7 ft "\ PHOTO
VCR ope CAMERA
4 Press RECORD/PAUSE to start or
pause recording.
5 Tally lamp lights if set to ON (page
37).
3 RECORD
Built-in Twin Capsule
2-Way Microphone
5 Set POWER to OFF when finished.
*To remove cassette,
slide TAPE EJECT in Record/
Pause mode. (page 15).
Note: ra
e When Camcorder is aimed at excessively
bright objects, or bright lights, a vertical bar
may appear in the picture. This is normal for
the CCD pick-up. Try to avoid this when
possible.