Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 36

High Speed Shutter
Se ae a, UTR. / SRM RN ER aA oe NEEL EAT EE 2 NEE ST ERI, EM SO Fa SE eh a
Improves Still or Slow Motion playback Before you begin...
picture of high speed subjects (e.g. atennis . connect Camcorder to power source.
stroke), when viewed on Camcorder or 3: . set POWER to CAMERA.
or 4 head VCR. * Insert cassette with record tab (page 15).
"Auto Shutter
In AUTO mode (no indication in EVF or LCD monitor), shutter speed is auto-adjusted
from 1/60 to 1/350 according to subject brightness.
* AUTO mode is selected each time POWER is set to CAMERA.
"Manual Selection:
The faster the shutter speed, the more light is needed for proper picture and color quality.
High Speed Shutter indication flashes if light is inadequate. Provide additional light.
1 Press HIGH SPEED SHUTTER
while recording.
2 Press repeatedly to change shutter
speed. (See below, left.)
HIGH SPEED
SHUTTER
Note:
* Provide additional halogen or tungsten
light for use indoors or in poor light.
Fluorescent light degrades picture.
¢ Auto Focus may not function properly if
high speed shutter is used in inadequate
light.
* Setting reverts to AUTO each time
POWER is set to CAMERA.
No Indication
EVF or LCD monitor 1/60
t
1 pe
ve
Bist
1/1000
1/2000
1/4000
1/10000
36 For assistance, call 1-800-211-PANA(7262)