Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 33

Source (Playing)
Camcorder
Out
VHF Connecting
Cable (not supplied)
To Audio-4][3- To Video
In Ly In
Audio/Video Cable
(supplied)
FMonitorwith:yourehVs
¢ Turn TV on and tune to VCR
channel (CH3 or CH4).
* Set TV/VCR Selector on VCR to VCR.
bing)
Ran TOS
Before you begin...
* Make Camcorder-VCR connections
(see left).
« Turn both units on.
¢ Set VCR input signal to LINE.
Please see VCR owner's manual.
* Set Camcorder POWER to VCR.
1 Insert a pre-recorded tape
into Camcorder and a blank tape with
record tab into VCR.
Press PLAY on Camcorder, then
press STILL at starting point.
Press REC, then STILL/PAUSE on
VCR.
Press STILL on Camcorder and
STILL/PAUSE on VCR again to start
copying.
ao Ff, W NN
Press STOP on both units to stop
copying.
Note:
¢ Camcorder will only playback tapes
recorded in SP or SLP mode.
¢ Dubbing may reduce picture quality.
CAUTION:
Unauthorized exchanging and/or
copying of copyrighted recordings may
be copyright infringement.
33