Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 22

For recording in dim lighting.
Q
ight
Before you begin...
* Connect Camcorder to power source.
* Set POWER to CAMERA.
Set LIGHT to AUTO.
Light turns on/off automatically according
to lighting conditions.
Or, set LIGHT to ON/OFF manually.
°D LIGHT
on 0
CM) }
=D appears in EVF or LCD monitor when
Light is on.
Caution:
Light becomes hot. Never cover Light while
on.
Before you begin...
* Order Part No. VULS0001 (VLLW0015 and
cushions) for replacement bulb unit.
* Set POWER to OFF.
1 Press in on both sides of lens
cover and pull straight out and off.
2 Using Tweezers or needle-nose
pliers, carefully remove bulb.
* Take unit to service center if you
need assistance.
3 Replace bulb using a clean cloth or
tissue.
4 Replace lens cover.
DANGER: ole
*« Using Light reduces battery operating time.
Use only replacement bulb (PART NO. * Provide proper ventilation when using Light
VLLW0015) supplied by Panasonic to extensively in a hot environment.
reduce risk of fire. ' : - * Using Light when the Camcorder is powered
Handie new bulb with cloth or tissue as by a car battery may shorten bulb life.
skin oils will decrease bulb life. ¢ Set Light to OFF when not in use
Remove lens cover and allow bulb to .
cool before replacing to avoid possible Plas hare aelea ercesevetOiee ay
burn hazard. ;
22 a For assistance, call 1-800-211-PANA(7262)
. t .
- ¢ ~
-* or. Th ~_* fiw . ae