Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 14

Supplying Power
Bae SE ee he es
EE OS - RA NIE Se a RS Ee SS
Connect AC Adaptor VCR DC OUT
to Camcorder DC IN with supplied
DC Power Cable.
Plug in AC Adaptor.
POWER Lamp lights.
Notes:
* AC Adaptor cannot power Camcorder while
charging Battery.
« When not in use, unplug AC Adaptor from AC
outlet. (Adaptor uses 1.2 W of electricity while
plugged in:)
VCR DC OUT Connector
CAUTION:
This unit will operate on 110/120/220/240 V AC. An AC piug adaptor may be
required for voltages other than 120 V AC. Please contact either a local or foreign
electrical parts distributor for assistance in selecting an alternate AC plug.
We recommend using the accessory power plug adaptor (VJSS0070) in an area
which has special! AC outlets.
-Car'Batteny, Cord:(Optional)*
1 Connect PV-C16 Car Battery Cord
{optional, page 76) to Camcorder
OC IN.
2 A Start engine first.
B Plug Car Battery Cord into
Cigarette lighter socket.
¢ lf Car Battery cord fuse needs
replacing, use exact current rating
(in amps).
Notes:
¢ This cord only works in vehicles equipped
with DC 12 V (negative ground) battery.
Check with your car/truck dealer. Use
only specified car battery cord.
Sl OL
p Cigarette Lighter
Socket (12 V)
_ _ © To avoid blowing the car battery cord
ov y7y fuse, do step 2 in the proper order.
Car Battery Cord Ci se * Running vehicles must be well ventilated.
(optional) Hgarete * When not in use, disconnect cigarette
Pp Lighter Plug lighter plug.
14 For assistance, call 1-800-211-PANA(7262)
ae i" " : -