Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 52

LUSIAGINEIWIGHTE
For capture of still images in dim lighting.
RECORD/
Digital Still Camera
Before you begin...
¢ Connect Camcorder to power source.
¢ Insert the CompactFlash Card (page 49).
* Set POWER to PHOTO.
Set LIGHT to AUTO.
When RECORD/PAUSE is pressed to
capture an image in dim lighting, the Light
comes on for about 2 seconds, the image
is captured, then goes out.
Or, set LIGHT to ON/OFF manually.
=D appears in EVF or LCD monitor when
Light is on.
Caution:
Light becomes hot. Never cover Light
while on.
Note:
« Using Light reduces battery operating
time.
¢ Provide proper ventilation when using
Light extensively in a hot environment.
¢ Using Light when the Camcorder is
powered by a car battery may shorten
butb life.
¢ Set Light to OFF when not in use.
5? For assistance, call 1-800-211-PANA(7262)