Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 58

Digital Still Camera
MOTTeTLELAWAT oleh Modes
Insert a Captured still image into the current recording, or vice versa, in one of three
wipe effects. Before you begin...
* Connect Camcorder to power source.
* Insert the CompactFlash Card (page 49).
¢ Set POWER to CAMERA.
1 Repeat step 1 and 2 on page 57 to
set Picture in Picture Wipe title.
2 Press MODE repeatedly for Wipe
effect 1, 2, or 3 (See left).
e WIPE 1 will flash for a while to store
the image for the wipe.
3 Press START:
once — inserts captured image.
twice — inserts current recording
MODE picture.
WIPE t — WIPE 2 — WIPE 3 ¢ You can freeze the wipe in progress
by pressing START. Press START
(Current Recording) again to resume wipe.
fA
(first press) |
WIPE e WIPE 3
Note:
* If CompactFlash Card is not inserted,
"NO CF CARD" appears on-screen. Set
Power to OFF, then insert the
CompactFlash Card.
(Captured image) ¢ Pictures captured with other brand
products cannot be used with this
. Cunsereaas Camcorder.
* If "INCOMPATIBLE IMAGE" appears
podbean, Lae on-screen, the size of the captured
5 | image cannot be played back on this
WIPE 1 WIPE 3 Camcorder.
«lf "CF CARD ERROR' appears
on-screen, see page 80.
* If Digital Wipe mode is selected, the
following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Fitter, Digital Zoom, Digital E.1.S..,
Still/Strobe/Wide.
58 For assistance, call 1-800-211-PANA(7262)