Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 57

Digital Still Camera
UIE) Before you begin...
ae * Connect Camcorder to power source.
paplured st) ese: (pages 90: =) ee * Insert the CompactFlash Card (page 49).
be recorded along with the current picture... ga: poWER to CAMERA.
at i nie BP) os
( P - P = Picture in Picture )
1 Set DIGITAL SELECT to DIGITAL
WIPE.
« A still image captured on the CF
card and the Multi image playback
page number is displayed on the
right side of the screen.
«if there are no recordings on the
card, "NO PICTURE" appears
on-screen.
Moving 2 Press + (FF) or - (REW) to select
Picture . still image to be used.
3 Start recording (page 23).
¢ When recording starts, Multi image
playback number disappears. Then
the capture still images can be
recorded along with the current
picture.
* To exit from the Picture in Picture
Wipe title mode, press MODE
(page 58).
Note:
¢ lf CompactFlash Card is not inserted,
"NO CF CARD" appears on-screen. Set
Power to OFF, then insert the
CompactFlash Card.
¢ Pictures captured with other brand
products cannot be used with this
Camcorder.
* If "INCOMPATIBLE IMAGE" appears
on-screen, the size of the captured
image cannot be played back on this
Camcorder.
¢ lf "CF CARD ERROR?" appears
on-screen, see page 80.
« lf Picture in Picture Wipe Title selected,
the following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Filter, Digital Zoom, Digital E.1.S.,
Still/Strobe/Wide.
57