Making and Receiving Calls
The following features of the EXA915 phone are different depending on the Handset's
location when you make or receive a call.
ANSWER CALL
MAKE CALL
HANG UP
REDIAL
Sometimes when you press
and the phone will not disconnect. If this happens, place the Handset on the
Base Unit or press
Changing Channels, Flash, and Page/Find
To change channels or access call waiting while the phone is in use, or to use the
one-way page to locate the Handset, follow these steps:
CHANGING
CHANNELS
FLASH
PAGE/FIND
EXA915
Using Your Phone
HANDSET
Pick up Handset (AutoTalk)
-OR-
If the Handset is off the Base:
1) Pick up Handset.
t
2) Press
.
1) Pick up Handset.
t
2) Press
.
3) Listen for dial tone.
4) Dial the number.
t
Press
.
-
-
OR
Return Handset to Base
(AutoStandby).
1) Pickup Handset
t
2) Press
.
3) Listen for dial tone.
RF
4) Press
.
t
t
again while holding the Handset close to the Base Unit.
HANDSET
c
Press
.
Note: Change channels to help
eliminate background noise.
If the call waiting tone sounds,
R
press
to accept the waiting
call.
-
-
OR
If you have finished a call and
want to make another call,
R
press
to hang up and
get a dial tone.
Note: When page/find is pressed
on the Base Unit,
the Handset beeps.
Press speaker on the Base Unit.
Note: You must use the Handset
Press speaker on the Base Unit.
Note: You must use the Handset
to hang up the phone, you may get an error tone
Note: You must use the Handset to
Note: The Base Unit does not
Press page/find on the Base Unit to
locate the Handset.
BASE UNIT
to make a call.
to make a call.
BASE UNIT
change channels.
R
have
. You must use the
Handset for call waiting and
to make a call.
19