Automatic Digital Code Security - Uniden EXA915 User Manual

Automatic Digital Code Security

To avoid unauthorized calls on your phone, a Digital Code feature was added to all
EXA915 phones. This Digital Code is shared only between the Handset and Base Unit.
The code is set automatically when you first use the phone.
Changing the digital security code
To change the Digital Code, be sure the
Handset is on the Base, then:
1. Press page/find
on the Base
Unit.
2. After the Handset stops
beeping, remove it
from the Base Unit.
3. Wait 5 seconds then
place the Handset
on the Base Unit.
The status LED
will blink
quickly,
indicating
that the code
has changed.
18
volume
status
new delete
repeat
play/stop
skip
ogm
memo answer
Restoring the digital security code
If the Base Unit loses power while the
Handset is off the Base, the Digital Code
may be erased. When this happens, the
Handset will not function.
To reestablish communication between
the Handset and Base Unit:
1. Restore power
to the Base Unit.
2. Place the Handset
back on the Base
Unit.
3. The status LED
will blink
quickly,
indicating that
the Digital
Code has been
reset.
volume
status
new delete
repeat
play/stop
skip
ogm memo answer
EXA915