Wall Installation - Uniden EXA915 User Manual

Wall Installation

Standard Wall Plate Mounting
These phones are designed to be
mounted on a standard AT&T or GTE
wall plate.
1. Slide the wall mount stand into the
notches at the top of the Base Unit.
Rotate the wall mount stand down and
snap it into place.
2. Plug the AC
Adapter into
the Base Unit
3. Wrap the AC
Adapter cord
around the
strain relief on
the Base Unit
and place the
AC Adapter
cord inside
the molded
channel..
4. Plug one end of
the telephone
cord into the
TEL LINE jack
on the Base
Unit.
10
5. Place the
telephone
cord inside the
molded
channel on the
bottom of the
Base Unit.
6. Then, plug the
other end of
the telephone
cord into the
modular jack
on the wall.
7. Place the Base Unit on the posts of the
wall plate and push down until it's
firmly seated.
9. Plug the AC
Adapter into a
standard 120V
AC wall outlet.
Do not use
an outlet
controlled by a
wall switch.
Use only the Uniden
AC Adapter supplied
with this phone.
EXA915