Selecting A Preset Ogm - Uniden EXA915 User Manual

Selecting a Preset OGM

After you have recorded an outgoing message, you can set your Answering System to
play either a preset message or your outgoing message.
1. Press ogm .
Your recorded
outgoing
message will
begin to play.
2. While your
recorded outgoing
message is playing,
press ogm again.
A tone will
sound, and
you hear the
preset message
"Hello. No one is available to take
your call, please leave a message
after the tone" on the Base Unit
speaker. A second tone sounds after
the preset message plays, and the
Answering System automatically
returns to Standby.
If the REC TIME/ANN/4/1 switch
is set to Announce Only, then
the preset message "Hello.
No one is available to take your
call" is played.
30
volume
status
new delete
repeat
play/stop
skip
ogm
memo answer
3. To select your
recorded
message again,
press ogm .
The preset
message will
begin to play on
the Base Unit speaker.
4. While the preset
message is
playing,
press ogm again.
A tone will
sound, and
your recorded
message will
play on the Base Unit speaker. A
second tone sounds after your
message plays, and the Answering
System automatically returns to
Standby.
volume
status
new delete
repeat
play/stop
skip
ogm
memo answer
EXA915