Wall Installation - Uniden EXS 9995 Owner's Manual

Place the power cord so that
it does not create a trip
hazard or where it could
become chafed and create a
fire or electrical hazard.
DO NOT use an outlet
controlled by a wall switch.
6

WALL INSTALLATION

Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1. Snap the wall mount adapter into the
bottom of the base as shown.
2. Plug the AC adapter into the base.
3. Place the AC adapter cord inside the
molded wiring channel.
Wrap the cord around the strain relief
notch.
4. Plug the AC adapter into a standard 120V
AC wall outlet.
5. Plug one end of the short telephone cord into the
back of the base. Plug the other end into a standard telephone jack.
If your second line has a separate jack, plug the other cord into the base
and wall jack.
6. Align the mounting slots on the base with the mounting posts on the wall. Push
in and down until the phone is firmly seated.
jack on the
TEL LINE 1/2