Cellular Apn - ZyXEL Communications NR/FWA Outdoor Series User Manual

Table 16 Network Setting > Broadband > Cellular WAN (continued)
LABEL
VLAN
Offload
Proxy ARP Feature
Proxy ARP
Cancel
Apply

7.4 Cellular APN

Click Network Setting > Broadband > Cellular APN to display the following screen. Configure a cellular
connection, including the Access Point Name (APN) provided by your service provider.
Figure 49 Network Setting > Broadband > Cellular APN
The following table describes the labels in this screen.
Table 17 Network Setting > Broadband > Cellular APN
LABEL
APN Settings
#
Enable
Mode
APN
Chapter 7 Broadband
DESCRIPTION
If you enabled TX Tagging for VLANs in Network Setting > VLAN Group > Add New VLAN Group/
Edit, then enable VLAN Offload to allow incoming tagged packets to pass through the IPA
(Internet Packet Accelerator) in order to improve data transmission to LAN clients.
Alternatively, disable this field to only allow untagged packets to pass through the IPA.
An IPA is a hardware component that accelerates data transmission over networks. IPA
processes network functions such as routing, filtering, network address translation and
aggregation.
Enable this to set your Zyxel Device as a server to handle ARP queries from different subnets. The
Zyxel Device will offer Zyxel Device's own MAC address as an reply.
Click this to exit this screen without saving.
Click this to save your changes.
DESCRIPTION
This is the number of an individual APN.
This indicates whether the APN is enabled or disabled.
This shows Auto when the Zyxel Device configures the APN of a cellular network automatically.
This shows Manual when the APN is entered manually.
This shows the APN.
NR/FWA Outdoor Series User's Guide
77