ZyXEL Communications NR/FWA Outdoor Series User Manual page 88

Figure 58 Network Setting > Broadband > Cellular Lock (LTE)
The following table describes the fields in this screen.
Table 24 Network Setting > Broadband > Cellular Lock (LTE)
LABEL
LTE(4G) Lock Management
PCI Lock
Add New Rule
Physical Cell ID
RFCN
Delete
Cancel
Apply
Scan
Chapter 7 Broadband
DESCRIPTION
Slide this to the right to enable PCI (Physical Cell Identifier) Lock on base stations when
the Zyxel Device has 4G LTE connections. Physical Cell ID (PCI) is an identifier for a cell,
namely a cellular base station. PCI and Radio Frequency Channel Number (RFCN) are
combined to specify the base station.
Click to add a new cellular lock rule.
Enter the PCI number (0 – 504) of the base station to which you want the Zyxel Device to
connect.
Enter the RFCN (Radio Frequency Channel Number) for the LTE frequency of the
specified PCI (1 – 65535).
Click the Delete icon to remove an entry.
Click this to return to previous settings without saving.
Click this to save and apply your changes.
Note: Clicking Scan will cause a temporary Internet disconnection.
NR/FWA Outdoor Series User's Guide
88