Add Or Edit Mqtt - ZyXEL Communications NR/FWA Outdoor Series User Manual

Table 101 Maintenance > TR-369 Local Agent > MQTT (continued)
LABEL
Enable
Broker Address
Broker Port
Transport
Protocol
Alias
QoS
Client ID
Modify

28.3.1 Add or Edit MQTT

Click Add New in the MQTT screen or click the Edit icon next to a controller. Use this screen to configure
the required information for the MQTT broker.
Figure 162 Maintenance > TR-369 Local Agent > MQTT: Add or Edit
The following table describes the fields in this screen.
Table 102 Maintenance > TR-369 Local Agent > MQTT: Add or Edit
LABEL
Enable
Broker Address
Broker Port
Chapter 28 TR-369
DESCRIPTION
This displays if the MQTT client is enabled.
This displays the URL of the MQTT broker.
This displays the port used for registration with the broker.
This displays the transport protocol (TCP/IP or TLS) for the Zyxel Device to send messages to the
broker.
This displays a friendly name to identify the MQTT client.
This displays the Quality of Service transmission between the Zyxel Device and the broker.
This field displays the unique Client ID of the client connecting to the MQTT broker.
Click the Edit icon to configure an entry.
Click the Delete icon to remove an entry.
DESCRIPTION
Slide this to the right to enable this MQTT client.
Enter the URL of the MQTT broker. Make sure the broker is reachable from the Zyxel Device.
Enter the port used for registration with the broker. The default port is shown here. If the broker is
using a different port, enter that port number here.
NR/FWA Outdoor Series User's Guide
239