5.4 Cellular Network Setup
This section shows you how to set up a cellular network.
5.4.1 Setting up a Cellular Network Connection
This section gives you an example on how to connect to the Internet using over a cellular connection.
Insert a SIM Card into your Zyxel Device SIM slot. Make sure this SIM card has an active data plan with
1
your Internet Service Provider (ISP).
Connect your Zyxel Device to your computer, and log into the Web Configurator.
2
If your SIM has a PIN Code, enter this code in the Network Setting > Broadband > Cellular SIM screen.
3
Use the Home screen to check the Internet Status (IPv4) or Internet Status (IPv6). If it shows Connected
this means your Internet connection is up.
5.4.2 Setting up a Cellular APN setting
You can define an APN (Access Point Name) which is a connection profile with the parameters you
need to connect to a cellular network.
Click Network Setting > Broadband > Cellular APN to display the following screen.
Click the Edit icon (
Chapter 5 Web Interface Tutorials
) in the Cellular APN screen, the following screen appears.
Nebula Mobile Router User's Guide
72