Way Conferencing - Uniden DCT5260 Owner's Manual

DCT5260_OM 10/1/02 5:31 PM

3-Way Conferencing

The phone permits 3-way conversations between 2 handsets, and an outside line.
1) During a call, press talk/flash on another handset to initiate
the 3-way conversation.
2) To remove either caller from your conversation, press end on either of the handset.
The other handset will still be connected to the call.
Intercom / Call Transfer Feature
If you have one or more extra handset, you can enjoy an intercom call between
handsets. Also, you can place a outside call on hold and transfer the call to
another handset.
• If the party is busy or is in the out of range, the handset returns to the standby mode.
• If any of the following occurs while selecting the other handset,
the operation will be canceled.
- Press talk/flash or speaker.
- Receive an outside/intercom call or page.
• When the party does not answer within 1 minute, the operation is canceled. If a call
transfer is canceled due to the out of range, to back to the call, press talk/flash on
the initiated handset shortly.
Intercom
1) Press intercom/hold in the standby mode.
2) Select the handset you want to talk with from the
selection list within 10 seconds. To select the handset,
L M
press or , then press the OK soft key.
If you select "All", all handsets will be paged.
An intercom tone sounds.
Page 49
T o i n t e r c o m
H a n d s e t # 2
H a n d s e t # 3
BACK BACK OK
E X PA N D I N G Y O U R P H O N E [ 49 ]