Using Do Not Disturb
The Do Not Disturb or DND feature turns off the audio ringers of the
base and all handsets at the same time. It does not affect any of the
visual ringers.
With the phone in standby, press and hold
The phone automatically turns on the answering system and shows Do
Not Disturb in the display on all handsets.
To cancel, press
If you turn the answering system off while DND is on, the phone
turns off DND along with the answering system.
Adjusting the Base Visual ringer
The
VISUAl rINGEr
of the base; use this switch to change
the brightness of the base visual ringer.
(It doesn't affect the audio ringers.)
Slide the switch so that its center
(marked with the arrow in the picture)
lines up with the brightness you want to
use:
,
HIGH
LOW
Using the Audio Boost
You can increase the earpiece volume for normal calls and intercom calls.
During a call, press
audio boost is on,
Using Text-To-Speech
With the Text To Speech (TTS) feature, your phone can announce phone
numbers or names in several different situations.
When you... (from standby) The phone announces...
Receive a call
Dial a number
Open the phonebook
16
Using Special Features
DO NOT DISTUrb
switch is at the back
, or
.
OFF
to increase the volume of the audio. While
bOOST
appears in the display. Press
The caller's name (if sent by a Caller ID service)
The phone number you dialed
The name of the entry you are looking at
DO NOT DISTUrb
.
on the base.
again to turn off.
bOOST