Entering/Editing Ltr Channels/Talkgroups - Uniden BC246T Owner's Manual

Setting Up a Channel Group
EDIT GROUP
NEW GROUP
The scanner creates a group with a default name of
GROUP nn. nn increments by one for each new group you
create within a system.
Next, refer to the appropriate section to set group-wide
options:
• See "Entering/Editing the Group Name" on Page 71
• See "Setting the Group Quick Key" on Page 72
• See "Setting Group Lockout" on Page 72
• See "Deleting Groups" on Page 73
• See "Entering/Editing LTR Channels/ Talkgroups" on
Page 62
Entering/Editing LTR Channels/
Talkgroups
Edit Channel
NEW Channel
Enter the talk group ID for the channel, then press E.
Note: Press
Then, refer to the appropriate section to change a
channel setting:
• See "Editing the Channel Name" on Page 73
• See "Setting Channel Alert" on Page 75
• See "Setting Channel Lockout" on Page 78
• See "Deleting Channels" on Page 78
• See "Copying/Pasting Channels" on Page 79
To program another channel within the same group, press
, then repeat the above.
Menu
To create another channel group and enter more
channels, press
ting Up a Channel Group" on Page 62.
To direct-enter LTR talkgroups, follow the steps under
"Quick-Storing Channels or Talk Group ID's" on Page 44.
E
E
E
E
to enter a hyphen.
four times, then proceed from "Set-
Menu
Programming Radio Systems
Input TGID
62