ID Search - the scanner stops on any transmission for
unlocked talk group ID's.
Note: You can also change this setting by pressing Scan
while scanning the system.
Setting the Base Frequency/Step/Offset
(Motorola UHF/VHF Systems Only)
program system
Menu
Select the system
Edit Sys Option
Edit Band Plan
Select Plan
Input Base Freq
Select Step (5 kHz, 12.5 kHz, 25.0 kHz, 37.5 kHz, 50.0
kHz, 62,5 kHz, 75.0 kHz, 87.5 Khz, or 100.0 kHz)
Offset (380-759)
This setting lets you enter the base frequency, step, and
offset for the band plan you select. This information lets
you set the scanner so it will scan a Motorola UHF/VHF system.
Setting Data Skip
(Conventional Systems Only)
program system
Menu
Select the system
Edit Sys Option
Set DATA SKIP
This setting controls how the scanner behaves when it
stops on a channel that has a data signal.
On - the scanner stops briefly on the channel, but then
immediately resumes scanning automatically. Press E to
select.
Off - the scanner remains on the channel until the
transmission stops. Press E to select.
Programming/Editing Optional Settings
E
E
E
Select a band plan (1, 2, or 3)
Input the base frequency
Input the offset
E
E
E
66
E
E
E
E
E
E