Setting Channel Modulation (Conventional Channels Only) - Uniden BC246T Owner's Manual

CTCSS - the scanner only opens squelch if the CTCSS tone
you select is also present with the signal. The scanner
then prompts you to enter or scroll to the desired tone.
DCS - the scanner only opens squelch if the DCS tone you
select is also present with the signal. The scanner then
prompts you to enter or scroll to the desired tone.
Set Lockout - the scanner does not stop on the channel if
the tone you select is present. The scanner prompts you
to select a CTCSS or DCS tone.
Notes:
• The default setting is Off.
• See "What is CTCSS/DCS?" on Page 19 for a
complete list of CTCSS and DCS tones.
Setting Channel Modulation
(Conventional Channels Only)
program system
Menu
Select the system
Edit Group
Select the group
Edit Channel
Select the channel
Set Modulation
This setting controls the demodulation method used for
the channel. Select your setting, then press E.
Auto - the scanner uses the default modulation for the
frequency (see the table at the front of the manual).
AM - the scanner uses AM (amplitude modulation) for the
frequency.
FM - the scanner uses FM (frequency modulation) for the
frequency.
NFM - the scanner uses narrowband FM for the
frequency.
Programming/Editing Optional Settings
E
E
E
E
E
E
76
E