Entering/Editing Conventional Channel Groups; Entering/Editing Conventional Channels - Uniden SC230 Owner's Manual

SC230 Paper OM.fm Page 53 Wednesday, October 6, 2004 10:51 AM
Entering/Editing Conventional
Channel Groups
To enter channels in a conventional system, first set up a
channel group (or groups) to hold the channels. Then,
enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
E
Edit Group
E
New Group
The scanner creates a group with a default name of
Group nn. nn increments by one for each new group you
create within a system.
Refer to the appropriate section to set group-wide
options:
• See "Entering/Editing the Group Name" on Page 58
• See "Setting the Group Quick Key" on Page 59
• See "Deleting Groups" on Page 60
• See "Setting System Lockout" on Page 56
• See "Entering/Editing Conventional Channels" on
Page 53

Entering/Editing Conventional Channels

Edit Channel
New Channel
Enter the frequency for the channel, then press E. Then,
refer to the appropriate section to change a channel
setting:
• See "Editing the Channel Name (Conventional Sys-
tems Only)" on Page 60
• See "Setting Channel Priority" on Page 61
• See "Setting Channel Alert" on Page 62
• See "Deleting Channels" on Page 65
• See "Copying/Pasting Channels" on Page 66
Programming Radio Systems
E
E
Input Frequency
53