Preprogrammed Systems - Uniden BC246T Owner's Manual

Preprogrammed Systems

Preprogrammed Systems
Your scanner is preprogrammed with over 400 channels
covering police, fire, and ambulance operations in the 25
most populated counties in the US. The following list
details the preprogrammed information.
By default, all of the preprogrammed systems are
unlocked, and your scanner begins to scan them when
you turn it on. To speed up scanning, you can lock out
systems that are beyond your reception area (typically no
more than 25 miles using the supplied antenna).
Follow these steps to lock out systems:.
1. Press and hold
2. While continuing to hold
to select a system you want to lock out.
3. While continuing to hold
the system.
4. Repeat Steps 2, 3, and 4 to lock out additional
systems.
The preprogrammed systems provide a starting point;
you will want to find out more information about your local
radio systems so you can customize the programming to
better suit your listening preferences.
Notes:
• You might hear transmissions on frequencies assigned
to very distant stations. This will happen if a local
system also uses the same frequency. Disregard the
text tag for these transmissions (e.g. if you are in
California, you aren't really receiving Florida
transmissions even if the scanner displays
Dade County).
• To free up memory, you can delete systems that you
will not be monitoring. Refer to "Deleting Systems" on
Page 71.
• Data used for the preprogrammed information was
supplied courtesy of http://www.radioreference.com ,
the Internet's premier scanning resource
(RadioReference is not affiliated with Uniden America
Corporation).
.
Func
Func
Func
Preprogrammed Systems
119
, rotate the scroll control
, press L/O to lock out