Setting System Frequencies; Entering/Editing Motorola Channel Groups - Uniden BC246T Owner's Manual

• See "Reviewing Locked Out Frequencies" on
Page 89
• See "Setting System Attenuation (Trunked Systems
Only)" on Page 70
• See "Deleting Systems" on Page 71
• See "Copying Systems" on Page 71
• See "Setting System Frequencies" on Page 56
• See "Entering/Editing Motorola Channel Groups"
on Page 56

Setting System Frequencies

SET FREQUENCIES
New FREQUENCY
Input a system frequency, then press E.
To enter additional frequencies, press
control to select New Frequency, then repeat the above.
Note: If you select Control Channel Only mode (see "Set-
ting Control-Channel Only (Motorola Systems Only)" on
Page 70), you only need to enter the frequency(s) that
can be assigned as the control channel. Most frequency
lists usually indicate which of the frequencies are the
control channel frequencies. Otherwise, you must enter
all of the frequencies.
Entering/Editing
Motorola Channel Groups
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter the
channel and channel parameters in the group(s).
Setting Up a Channel Group
Edit Group
The scanner creates a group with a default name of
Group nn. nn increments by one for each new group you
create within a system.
E
E
E
New Group
Programming Radio Systems
56
, use the scroll
Menu
E