Motorola systems use talk group ID's in multiples of 16.
ID numbers that fall between these ID's indicate special
status flags for the system. This setting determines how
the scanner will handle ID's that are not multiples of 16.
Select your setting then press E.
Ignore - the scanner rounds all received ID's down to the
next interval of 16.
Yes - the scanner treats all received ID's as unique ID's.
Note: The default setting is Ignore.
Setting the End Code Operation
(Motorola Systems Only)
program system
Menu
Select the system
Edit Sys Option
Set End Code
This setting determines how the scanner handles the
transmission end code sent by most Motorola systems.
Select your setting then press E.
Yes - the scanner immediately returns to the control
channel when it detects the end code.
Ignore - the scanner does not return to the control channel
until the carrier drops.
Note: The default setting is Yes.
Setting I-Call
(Motorola and EDACS Systems Only)
program system
Menu
Select the system
Edit Sys Option
Set I CALL
This setting determines how your scanner treats I-calls
while ID Searching.
Programming/Editing Optional Settings
E
E
E
E
E
E
E
E
68