Selecting A System; Storing A Conventional System - Uniden BC246T Owner's Manual

Scanner radio with trunktracking and automatic scanning capabilities
Hide thumbs Also See for BC246T:
Table of Contents

Advertisement

Selecting a System

To store frequencies or talk group ID's you find during
Auto Store, you must first select a system where the
frequencies or talk group ID's will be stored.
1. Press
Menu
For ... appears. Then press E. One of the search
feature options appear.
2. Turn the scroll control until Search and Store
appears, then press E to select it.
3. Turn the scroll control until the system where you
want to store the frequencies or talk group ID's
appears, then press E to select it.
If no systems are programmed, or all systems are
locked out, No System Stored appears.

Storing a Conventional System

You can store frequencies into the system you selected in
"Selecting a System". Otherwise, the scanner stores
frequencies in a new group it creates.
1. Follow Steps 1-3 under "Selecting a System".
A search option appears.
2. Turn the scroll control until the type of search you
want appears, then press E to select it. A search
band appears.
If all systems are locked out, All Locked! appears and
the scanner does not store any frequencies.
When you select a search range, the scanner looks for
active frequencies within that range and Search and
Store appears on the display's lower line and the system
name and search range name appear on the display's
upper line. When the scanner finds an active
transmission, it checks to see if the frequency has already
been stored in the system. If the frequency has already
been stored, the scanner continues to search. If the
frequency has not been stored, it stores the frequency
into a group named FOUND CHANNELS, then resumes
then turn the scroll control until Search
84
Searching and Storing

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bc246tuasd

Table of Contents