A Look At The Display - Uniden BC246T Owner's Manual

A Look At The Display

The display has indicators that show the scanner's
current operating status. The display information helps
you understand how your scanner operates. The dark
area shown above the icons in this illustration is the text
display area. Information about the currently tuned
frequency appears here.
SYS - shows the currently activated system, appears with
numbers (0-9). The currently active system indicator
flashes.
ATT - appears when the attenuation feature is turned on
(see "Setting System Attenuation (Trunked Systems
Only)" on Page 70).
PRI - appears when the priority feature is turned on (see
"Priority Scan" on Page 48).
- appears when you lock the keypad (see
"Locking/Unlocking the Keypad" on Page 48).
- alerts you when the battery power gets low.
GRP - shows the currently activated group, appears with
numbers ( - ). The currently active group indicator
0 9
flashes.
AM/FM/NFM - appears to show the type of transmission.
L/O - appears when you manually select a channel you
locked out or a skip frequency.
F
- appears when you hold down to select a
Func
function.
- appears when the scanner is set to a Close Call
feature mode (see "Using the Close Call Feature" on
Page 86).
Setting Up Your Scanner
39