7.6 Operating mode 'Static Colour'
This setting is only relevant if the device is working in Stand Alone mode and is not controlled
via DMX. In this mode you have the option to select a solid colour for continuous operation
and to set the flash frequency for all LEDs.
1.
Press [Mode], use [Up] and [Down] to select the menu option 'Static Colour Mode' and
confirm with [Setup].
2.
Use [Up] and [Down] to specify the intensity of the colour red in a range from
'000' ... '255' (bright ... dark) and confirm with [Setup].
3.
Use [Up] and [Down] to specify the intensity of the colour green in a range from
'000' ... '255' (bright ... dark) and confirm with [Setup].
4.
Use [Up] and [Down] to specify the intensity of the colour blue in a range from
'000' ... '255' (bright ... dark) and confirm with [Setup].
5.
Use [Up] and [Down] to specify the intensity of the colour white in a range from
'000' ... '255' (bright ... dark) and confirm with [Setup].
6.
Use [Up] and [Down] to specify the flashing speed of the LEDs in a range from
'000' ... '255' (slow ... fast) and confirm with [Setup] to exit the menu.
Operating
xBrick Quad 16×8W RGBW
39
LED Floodlight