Stairville xBrick Quad 16x8W RGBW User Manual page 43

Dimming
Colour selection
Resetting to factory defaults
Press [Dimming] to adjust the brightness level of the primary colours. Press [R] (red), [G]
(green), or [B] (blue) and use [+] and [–] to select a value between 0 and 255.
Use the coloured buttons to select a colour tone in any mode. The following assignment
applies:
Button Colour
0 Cyan
1 Purple
2 Magenta
3 Orange
4 Cold white
To reset the device, press [OFF] and subsequently [9], [8], and [7].
Button Colour
5 Light red
6 Light green
7 Bright blue
8 Yellow
9 Warm white
Operating
Button Colour
R Red
G Green
B Blue
A Amber
W White
xBrick Quad 16×8W RGBW
43
LED Floodlight