Panasonic NU-SC280WYPQ Operating Instructions Manual page 35

Before Requesting Service
Sounds will occur when
using the Steam function.
The sound of "Bar... Bar..."
may be emitted at the back
of the oven cavity during
and after the use of different
kinds of Convection function.
Steam accumulates on
the oven door and warm
air comes from the air
outlet.
Steam leaks out from all
four sides of the oven
door.
I accidentally operated
my oven without any food
in it.
The oven has an odour
and generates smoke
when using Convection
and Steam Convection
function.
The fan motor continues
operating after cooking is
over.
The rear side of the oven's
color has yellowing.
Door seal maybe
deformed.
Some smoke will be given
off from the cavity when
using different kinds of
Convection functions for
the first time.
The part where the power
supply cord connects to
the product's bottom plate
has loosened.
F0003CS80MP_eng-20230314.indd 34
ALL THESE THINGS ARE NORMAL:
This is caused by air mixed when the water tank is working. This is
normal.
This is a cause of thermal expansion and contraction of the metal
material used in the product, which is a normal phenomenon.
During cooking, steam and warm air are given off from the food.
Most of the steam and warm air are removed from the air outlet by
the air which circulates in the oven cavity. However, some steam will
condense on cooler surfaces such as inside and/or on the oven door.
This is normal and safe.
When a function related to steam is used, a lot of steam is
generated in the oven cavity during operation of the product. Some
steam may leak from all four sides of the oven door. This is normal.
Operating the oven empty for a short time will not damage the oven,
however, it is not recommended.
It is essential that your oven is wiped out regularly, particularly after
cooking by Convection and Steam Convection. Any fat and grease
that builds up on the roof and walls of the oven will begin to smoke
if not cleaned.
After using the oven, the fan motor will operate for several minutes
to cool the oven and electric components. This is normal.
Metal ions will generate yellow marks when heated. This is normal
and will not affect the use of the oven or cause harm to human
health.
The door seal may be distorted due to high temperature. This is
normal and will not affect the performance of use of the oven.
This is caused by the excessive oil in the cavity used for rust
protection.
This is normal.
- Eng-34 -
(continued)
2023/4/12 11:05:12