(5.6"/6.5" only)
4.
Smaller screws are included with the TPC-651T/TPC-651H, use these to avoid
blocking CFast slot or I/O ports.
2.4
Cabinet Installation and Earth Grounding setup
Follow the following steps to setup TPC system, and please pay attention that
Ground pin of TPC system should be connected to earth ground. Under this circum-
stance, TPC system could have the best performance such as EMI immunity, ESD
immunity, Surge immunity and also system isolation. If the TPC system is embedded
in the cabinet, the TPC system's ground, cabinet's ground and earth ground should
be connected together.
1.
Install the TPC system into the cabinet.
Step A: Connect the cabinet to earth ground.
Step B: Embed null TPC system into the cabinet without any I/O cable and power.
17
TPC-XX51T/H-E Series User Manual