Table of Contents
Advertisement
1. 9. 7. Interfaces
Connect or disconnect any cables from the RSO Rheometer only while the instrument is turned
off (LAN and USB interfaces excluded).
1. 9. 8. Drive System
The movement of the head is controlled by a linear drive system that will assist in the loading
of spindles and will also automatically set the required gap in CPS (Cone/Plate System) mode.
There are several predefined positions which the vertical drive system approaches during
normal operation:
-
CPS home position
M19-230-REV.B
- CPS zero gap position
© 2020 AMETEK Brookfield Inc. All rights reserved.
-CPS filling position
-CPS gap position
Page 18
Advertisement
Table of Contents
