Trenton GU10 Track Light – 1 Phase Preface Thank you for purchasing this Artecta product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Artecta Trenton GU10 Track Light – 1 Phase (including track adapter, not including light source) ● Suction cup ●...
Trenton GU10 Track Light – 1 Phase Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury.
Trenton GU10 Track Light – 1 Phase Attention Attention Power supply General safety Before connecting the device to the power supply, ● Do not shake the device. Avoid brute force make sure that the current, voltage and frequency when installing or operating the device. match the input voltage, current and frequency ●...
Description of the Device The Artecta Trenton GU10 Track Light – 1 Phase features a GU10 socket. It can be fitted with any GU10 LED or halogen light bulb of up to 50 W. It Is suitable for illumination of residential and commercial buildings.
Trenton GU10 Track Light – 1 Phase Installation and Deinstallation Safety Instructions WARNING Incorrect installation and deinstallation can cause serious injuries and damage of property. Installation and deinstallation of the device must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning electrical installations in buildings and working at heights.
Trenton GU10 Track Light – 1 Phase Mounting The device can be mounted only to a 1-phase track system. CAUTION Restrict the access under the work area during mounting. To mount the device, follow the steps below: 01) Disconnect the track system from the power supply. 02) Make sure that the power switch (05) is in OFF position and the track lock (06) is in unlocked position, as shown in Fig.
Trenton GU10 Track Light – 1 Phase 05) Select ON with the power switch (05) as shown in Fig. 09. Attention Do not slide the track adapter in the track to adjust the position of the device (see Fig. 10). This can damage the connectors.
Trenton GU10 Track Light – 1 Phase Direction Adjustment To adjust the angle of the device and the direction of the beam: ● Move the track head (03) around the pivot connector (02) to adjust the vertical position of the track head (03).
Trenton GU10 Track Light – 1 Phase Maintenance Preventive Maintenance Attention Before use, examine the device visually for any defects. Basic Cleaning Instructions To clean the device, follow the steps below: Disconnect the device from the electrical power supply. Allow the device to cool down for at least 15 minutes. 03) Remove the dust collected on the external surface with dry compressed air and a soft brush.
Need help?
Do you have a question about the Trenton GU10 Track Light - 1 Phase and is the answer not in the manual?
Questions and answers