Related Manuals for Artecta Par 16 Tracklight Warm on Dim V1
Summary of Contents for Artecta Par 16 Tracklight Warm on Dim V1
- Page 1 USER MANUAL ENGLISH Par 16 Tracklight - Warm on Dim Product code: A0320070 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 Par 16 Tracklight - Warm on Dim Preface Thank you for purchasing this Artecta product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Par 16 Tracklight - Warm on Dim Table of contents Introduction ................................3 Before Using the Product ..........................3 Intended Use ............................... 3 LEDs Lifespan ............................... 3 Text Conventions ..............................3 Symbols and Signal Words ..........................4 Symbols on the Information Label ........................4 Safety .................................. -
Page 4: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Artecta Par 16 Tracklight – Warm on Dim (including track adapter) ● Color frame (installed) ●... -
Page 5: Symbols And Signal Words
Par 16 Tracklight - Warm on Dim Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury. -
Page 6: Warnings And Safety Instructions
Par 16 Tracklight - Warm on Dim Warnings and Safety Instructions DANGER Danger for children For adult use only. The device must be installed beyond the reach of children. ● Do not leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within children’s reach. -
Page 7: Requirements For The User
Par 16 Tracklight - Warm on Dim Attention This device shall be used only for the purposes it is designed for. This device is intended for professional use as an architectural light spot. It is suitable for indoor installation in shops, exhibition halls, showrooms and similar venues. ●... -
Page 8: Description Of The Device
Par 16 Tracklight - Warm on Dim Description of the Device The Artecta Par 16 Tracklight – Warm on Dim is a compact spot suitable for indoor venues. It features a warm-on-dim technology which mimics the dimming curve of a traditional tungsten lamp. At 100 % output the color temperature is 2700 K and at 5 % –... -
Page 9: Product Specifications
Par 16 Tracklight - Warm on Dim Product Specifications Model: Par 16 Tracklight – Warm on Dim Electrical: Input voltage: 100–240 V AC, 50/60 Hz Power consumption: 8,7 W PFC: 0,97 Physical: Dimensions: 145 x 200 x 105 mm (L x W x H) (with the track adapter) Weight: 0,34 kg (with the track adapter) Track adapter:... -
Page 10: Installation And Deinstallation
Par 16 Tracklight - Warm on Dim Installation and Deinstallation Safety Instructions WARNING Incorrect installation and deinstallation can cause serious injuries and damage of property. Installation and deinstallation of the device must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning electrical installations in buildings and working at heights. - Page 11 Par 16 Tracklight - Warm on Dim 04) Insert the track adapter (01) in the track and push it until it snaps into place. 05) Turn the track lock (02) clockwise to lock the device in the track, as shown in Fig. 07. Fig.
-
Page 12: Dismounting
Par 16 Tracklight - Warm on Dim Dismounting CAUTION Restrict the access under the work area during dismounting. To dismount the device, follow the steps below: 01) Disconnect the track system from the power supply. 02) Let the device cool down before dismounting. 03) Set the circuit selector (03) in OFF position, as shown in Fig. -
Page 13: Direction Adjustment
Par 16 Tracklight - Warm on Dim Direction Adjustment To adjust the angle of the device and the direction of the beam, follow the steps below: 01) Pivot the device around the track adapter (01) to adjust the direction of the beam (see Fig. 13). 02) Turn the 2 adjustment screws (07) counterclockwise to release them. -
Page 14: Troubleshooting
Par 16 Tracklight - Warm on Dim Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. -
Page 15: Corrective Maintenance
Par 16 Tracklight - Warm on Dim To clean the device, follow the steps below: Disconnect the device from the electrical power supply. Allow the device to cool down for at least 15 minutes. 03) Remove the dust collected on the external surface with dry compressed air and a soft brush. 04) Clean the lens with a damp cloth. - Page 16 ©2021 Artecta...
Need help?
Do you have a question about the Par 16 Tracklight Warm on Dim V1 and is the answer not in the manual?
Questions and answers