SMC Networks ISE70G-N02-L2 Operation Manual page 29

Setting of diagnostic information selection
It is possible to set the condition in which the diagnostic information of the
process data can be transferred to the upper devices such as a master.
∗: IO-Link mode can provide the communication function.
∗: Refer to page
61 for details of the diagnostic information.
Press the SET button to set.
[F 0] Setting of the display units, switch output specifications and
●Available display unit and minimum set value
Unit ISE70
MPa 0.001
kPa
2
kgf/cm 0.01
bar 0.01
psi
diagnostic information selection function is completed.
ISE71
1
0.1
Return to function selection mode.
-28-
No.PS※※-OMV0004-H