SMC Networks ISE70G-N02-L2 Operation Manual page 34

Hysteresis setting
Set the pressure referring
to the setting method on
page 21.
Hysteresis mode: [H_1]
Window comparator mode: [WH1]
The snap shot function can be used.
(Refer to page 55)
Press the SET button to set.
Delay time setting
Set the delay time referring
to the setting method on
page 23.
Press the SET button to set.
Display colour setting
Press the UP or DOWN button to select the display colour.
Press the SET button to set.
∗1: Selected item becomes valid after pressing the SET button.
∗2: After enabling the setting by pressing the SET button, it is possible to return to the measurement mode by keeping pressing the
SET button for 2 seconds or longer.
Move on to delay time setting.
Move on to display colour setting.
Return to function selection mode.
[F 2] Setting of OUT2 completed
-33-
No.PS※※-OMV0004-H