SMC Networks ISE70G-N02-L2 Operation Manual page 32

●List of output modes
∗: The applicable errors are Er6, 8, 9, 15 as well as Er1 or 2 (excluding the error output).
If the point at which the switch output changes is outside of the set pressure range due to the selection of
normal or reversed output, the hysteresis value is automatically adjusted.
∗: The figure above shows an operation at OUT 1. For OUT2, all "1" in the figure will be changed to "2". (e.g.) P_1 -> P_2
-31-
No.PS※※-OMV0004-H