SMC Networks ISE70G-N02-L2 Operation Manual page 59

•Unlocking
(1) Press the SET button for 5 seconds or longer in measurement mode. When [oPE] is displayed on the
main display, release the button.
The current setting [LoC] or [UnL] will be displayed on the sub display.
(2) Select the un-locking [UnL] with UP or DOWN button. Setting is recognized by pressing the SET button,
then security code is required.
(3) For instructions on how to enter the security code, refer to "How to input and change the security code"
on page 59.
(4) If inputted security code is correct, the indication of the main display changes to [UnL], and pressing the
one of UP, SET or DOWN button releases key-lock and the measurement mode returns.
If the security code entered is incorrect, [FAL] will be displayed, and the security code must be entered
again. If the wrong security code is entered 3 times, [LoC] is displayed and the device returns to
measurement mode.
-58-
No.PS※※-OMV0004-H