CYBEX Arc Trainer 772A Service Manual page 160

Disconnect console cables
1. Disconnect console cables from MCC board.
MCC board cables
2. Unplug cables from MCC board by un-latching connectors with the following procedure:
a) Press in the top of the cable connector.
b) Ensure latch disengages the connector.
c) Unplug cable by holding down latch and pulling straight out from connector. Do not pull on wires,
remove by connector.
Cybex 772A, 772AT Arc Trainer Part Number
Page 160 of 202
Item Description
1 MYE/BV, Gray
2 CSAFE, Red
3 Console cable
4 Fan
5 Upper display
6 Headphone jack
7 iPod (optional)
8 Heart rate
9 Handset membrane
iPod board assembly (option-
10
al)
Item Description
DO NOT PULL CONNEC-
1
TOR OUT BY THE WIRES!
2 Step a, Latch
3 Step b
4 Step c
Qty.
1
1
1
1
1
1
1
1
1
1
Qty.
1
1
1
1