Make sure that Nano-SIM card is fitted properly into the tray. Figure 3 SIM tray removal 3. Insert the SIM card tray back. 4. After configuration, see “PC Connection (Windows)”. Device is ready to be mounted. Figure 3 Nano-SIM card insert Figure 4 SIM tray insert FMP100 | Wiki...
PC Connection (Windows) Configuration (Windows) • Connection by using Bluetooth: At first FMP100 device will have default factory settings set. These 1) Power-up FMP100 with DC voltage (12 – 30 V) power settings should be changed according to the user's needs. Main supply.
Page 7
Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured. More details about FMP100 configuration using Configurator can be found in our Wiki. Figure 7 Configurator Status window FMP100 | Wiki...
2005 – Port • 2006 – Data sending protocol • After successful SMS configuration, FMP100 device will (0 – TCP, 1 – UDP) synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by...
Configurator. User is able to select different indication color (Red, Velocity accuracy < 0,1 m/s (within +/- 15% error) Green or Blue), frequency of LED blinking and buzzer status. Hot start < 1 s Warm start < 25 s Cold start < 35 s FMP100 | Wiki...
Page 10
Towing Connection Cigarette lighter socket detection, Crash detection, Auto Configurable buttons Geofence, Manual Geofence, Trip GNSS antenna Internal High Gain Sleep, Online Deep Sleep, Deep Sleep modes GSM antenna Internal GSM High Gain Sleep, Ultra Deep Sleep FMP100 | Wiki...
Page 11
FOTA Web, FOTA, Teltonika Configuration and firmware update Configurator (USB, Bluetooth), FMBT mobile application (Configuration) Configuration, Events, Debug GPRS commands Configuration, Debug Time Synchronization GPS, NITZ, NTP Fuel monitoring OBDII Accelerometer, External Power Ignition detection Voltage FMP100 | Wiki...
Safety information The programming must be performed using a PC with autonomic power supply. This message contains information on how to operate FMP100 safely. By following these requirements and recommendations, Installation and/or handling during a lightning you will avoid dangerous situations. You must read these storm is prohibited.
This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste. Hereby, Teltonika declare under our sole responsibility that the above described product is in conformity with the relevant Community harmonization: European Directive 2014/53/EU (RED).
More information can be found at teltonika.lt/warranty-repair • Repaired • Replaced with a new product • Replaced with an equivalent repaired product fulfilling the same functionality • TELTONIKA can also repair products that are out of warranty at an agreed cost. FMP100 | Wiki...
Need help?
Do you have a question about the FMP100 and is the answer not in the manual?
Questions and answers