Table of Contents
Advertisement
Available languages
Available languages
C
(A)
C
(B)
(C)
A
B
D
E
A
B
F
INSTALLATION
Notes on safety for the installation
After carefully cleaning all around the area
where the burner will be installed, and arranging
the correct lighting of the environment, proceed
with the installation operations.
Danger: All the installation, maintenance and
disassembly operations must be carried out with
the electricity supply disconnected.
D9695
Warning: The installation of the burner must be
carried out by qualified personnel, as indicated
in this manual and in compliance with the stand-
ards and regulations of the laws in force.
Handling (C)
D9696
Warning: The handling operations for the
burner can be highly dangerous if not carried
out with the greatest attention: keep any unau-
thorised people at a distance; check the integrity
and suitableness of the available means of han-
dling.
Check also that the area in which you are work-
ing is empty and that there is an adequate
escape area (i.e. a free, safe area to which you
can quickly move if the burner should fall).
During the handling, keep the load at not more
than 20-25 cm from the ground.
Caution: After positioning the burner near the
installation point, correctly dispose of all residual
packaging, separating the various types of
material.
Before proceeding with the installation opera-
tions, carefully clean all around the area where
the burner will be installed.
S8962
WARNING
PRELIMINARY CHECKS
Checking the consignment
Caution: After removing all the packaging,
check the integrity of the contents. In the event
of doubt, do not use the burner; contact the sup-
plier.
The packaging elements (wooden cage or
cardboard box, nails, clips, plastic bags,
etc.) must not be abandoned as they are
potential sources of danger and pollution;
they should be collected and disposed of in
the appropriate places.
Checking the characteristics of the burner
Check the identification labels of the burner (A)
and the head (B), showing:
• the model (A);
• the year of manufacture, in cryptographic
form (B);
• the serial number (C);
• the data for electrical supply and the protec-
tion level (D);
• the electrical input power (E);
• the combustion head output (F).
Warning: A label that has been tampered with,
removed or is missing, along with anything else
that prevents the definite identification of the
parts and makes any installation or maintenance
work difficult.
7
The
packaging
of
the
includes a wooden platform, so it is
possible to move the burner (still
packaged) with a transpallet truck or
fork lift truck.
During lifting, check that the burner
remains balanced and in a horizontal
position.
The
manufacturer
accepts
responsibility in the event that lifting
is performed in a manner different to
that described in this manual.
burner
no
Advertisement
Table of Contents
