Table of Contents
Advertisement
Operation Manual / TPL76-C
8 Disassembly and assembly / 8.6 Dismantling and installing the tur-
bine diffuser and nozzle ring
© Copyright 2020 . All rights reserved.
Installing the nozzle ring
CAUTION
Fastening the nozzle ring
When fitting the nozzle ring, new threaded studs (56021), nuts (56022)
and locking plates (56018) from the customer spare part set (97070)
must be used.
Push in nozzle ring (56001) as far as it will go at the cover of the gas
u
inlet casing.
Coat threads of threaded studs (56021) with high-temperature grease
u
and fit threaded studs. Fit the locking plates (56018) and nuts
(56022).
Tighten nuts (56022) and bend locking plates (56018) over.
u
CAUTION
Correct assembly
The nozzle ring must be easily movable after assembly.
HZTL2485_EN
Rev.G
March 2020
Advertisement
Table of Contents
