Table of Contents
Advertisement
Operation Manual / TPL76-C
8 Disassembly and assembly / 8.7 Installing cartridge group
© Copyright 2020 . All rights reserved.
Fitting diffuser and wall insert
Screw swivel lifting eyes (90235) into holes in wall insert (77000).
u
Align mark (A) with notch (B).
u
Fit centering screws (90230) in such a way that spigots on centering
u
screws protrude maximum 5 mm.
Lower wall insert and align centering screws (90230) with threaded
u
holes.
Remove swivel lifting eyes (90235) and centering screws (90230).
u
Put the diffuser (79000) in place using the swivel lifting eyes (90235).
u
Remove the swivel lifting eyes (90235).
u
Fit screws (76002).
u
HZTL2485_EN
Rev.G
March 2020
Advertisement
Table of Contents
