ABB HT603545 Operation Manual page 91

Operation Manual / TPL76-C
8 Disassembly and assembly / 8.5 Removing cartridge group
© Copyright 2020 . All rights reserved.
Transporting / turning internal part of compressor casing
Carefully turn internal part of compressor casing complete with wall
u
insert and diffuser about support angle (90025) and put onto under-
lay.
Set down casing on flange (F).
u
Set down internal part of compressor casing in such a way that lifting
u
device (90190/90195) can be removed.
WARNING
Ensure that the shim does not slip.
Rest the internal part of the compressor casing only on flange (F).
u
Check shim and adjust as necessary.
u
HZTL2485_EN Rev.G March 2020