Table of Contents
Advertisement
Operation Manual / TPL76-C
5 Maintenance / 5.2 Cleaning the filter silencer
© Copyright 2020 . All rights reserved.
CAUTION
If the connecting rods (81269) are not located correctly in their recesses
on the filter silencer body (81135), the cover grids (81266) can twist and
shift. There is then a risk of foreign matter and dirt getting into the
compressor.
Join connecting rods (81269) using screws (81272). When tightening
u
the screws (81272), ensure that connecting rods (81269) are located
correctly in recesses in filter silencer body (81135). Now tighten
screws (81272) alternately until the following maximum torque is
reached:
Screw
81272
Screw lock nuts (81273) onto screw (81272) and tighten to following
u
torque:
Lock nut
81273
HZTL2485_EN
Tightening torque [Nm]
20
Tightening torque [Nm]
40
Rev.G
March 2020
Advertisement
Table of Contents
