Table of Contents
Advertisement
Operation Manual / TPL76-C
7 Removal and installation / 7.2 Removing the turbocharger
© Copyright 2020 . All rights reserved.
Version with compressor wheel cooling system
Dismantle air supply line. (See also chapter entitled Preliminary re-
u
marks / Layout and functionality)
Inspect the lifting gear.
u
Secure lifting gear to the suspension eyes of the bearing casing and
u
the turbine-end foot.
Unplug the cable connector on the speed sensor.
u
Loosen the fixing screws on the feet.
u
Lift the turbocharger off the engine and set it down to one side.
u
WARNING
If the turbocharger is not sufficiently supported or not supported at all
during removal and installation, it may tip over and cause severe injury
to personnel or accidents resulting in fatalities.
Support the turbocharger at a suitable point.
u
Cover the oil connection.
u
HZTL2485_EN
Rev.G
March 2020
Advertisement
Table of Contents
